Updated at

Video tutorial

How to Use TYMO FLAIGHT AQUA?

Power On & Steam Function

1. Fill the Water Tank

Before use, remove the water tank according to the operating instructions.

  1. Remove the rubber stopper.

  2. Using the included dropper, fill the tank with water.

Tip: Use only purified or distilled water. Do not add essential oils, fragrances, or other liquids.

  1. Secure the rubber stopper.

  2. Reinsert the water tank and press firmly until it clicks into place.


2. Turn On the Device

Press and hold the Power Button to turn on the device.

  • The default temperature on first use is 280°F (140°C).

  • When powered on again, the device's Smart Memory Function automatically recalls the last temperature used.


3. Activate the Steam Function

Press the Steam Button once to activate steam mode.

  • The white steam indicator light will illuminate.

  • Steam is released evenly from the center gap between the heating plates when the plates are closed.

  • During first use, steam will begin approximately 5 seconds after activation.

  • Releasing the clamp plates will temporarily pause steam output.

  • To deactivate steam mode, press the Steam Button again. No steam will be generated when the function is turned off.


Temperature Settings

Select the appropriate temperature based on your hair type by lightly pressing the Temperature Setting Button.

Temperature Recommended Hair Type
280°F (140°C ±10°C) Bleached, damaged, very fine, or thin hair
320°F (160°C ±10°C) Fine hair or slightly wavy hair
360°F (180°C ±10°C) Normal to thick hair; wavy to slightly curly hair
390°F (200°C ±10°C) Thick, coarse hair; tighter curls
430°F (220°C ±10°C) Professional use only; healthy, extremely coarse hair

The temperature settings cycle from low to high.


Heating Indicators

Heating Up

During heating, the indicator light for the selected temperature will flash.

Ready to Use

Once the selected temperature is reached, the indicator light will remain steadily illuminated in white.


Straight Hair Styling Instructions

Step 1

Section hair evenly.

Step 2

Place a section of hair between the clamp plates, starting near the roots.

Step 3

Glide the styler smoothly from root to tip in one continuous motion.

Step 4

Repeat as needed until the desired level of straightness is achieved.


Power Off

  1. Press and hold the Power Button to turn off the device.

  2. All indicator lights will turn off.

  3. Allow the device to cool completely before storing.


Helpful Tip

Hearing a sizzling sound? Don't worry.

The sound is created when our micro-cool mist instantly transforms into hydrating steam upon contact with the heated plates. This is normal and indicates that the hydration technology is working properly to help maintain moisture while styling.

similar articles

How to Use TYMO AIRQ?

Video tutorial

How to Use TYMO AIRHYPE?

Video tutorial

How to Use TYMO CUES?

Video tutorial

How to Use TYMO CLAMGO?

Video tutorial

How to Use TYMO STYLUX PRO?

Video tutorial

¿Cómo usar AIRBEAM?

Video tutorial

¿Cómo usar CURLPRO PLUS?

Video tutorial

¿Cómo usar FLAIGHT HOLO?

Video tutorial

¿CÓMO USAR FLIPRO?

Video tutorial

¿Cómo usar TYMO iONIC MINI?

Video tutorial

¿Cómo usar TYMO STYLEPRO (TYMO STYLUX)?

Video tutorial

¿Cómo usar TYMO ROVY?

Video tutorial

¿Cómo usar TYMO ROTA?

Video tutorial

¿Cómo usar TYMO iONIC PLUS?

Video tutorial

¿Cómo usar TYMO CURLGO?

Video tutorial

¿Cómo usar TYMO PORTA?

Video tutorial

¿Cómo usar TYMO PORTA PRO?

Video tutorial