Tutorial video
How to Use TYMO FLAIGHT AQUA?
Power On & Steam Function
1. Fill the Water Tank
Before use, remove the water tank according to the operating instructions.
1. Remove the rubber stopper.
2. Using the included dropper, fill the tank with water.
Tip: Use only purified or distilled water. Do not add essential oils, fragrances, or other liquids.
3. Secure the rubber stopper.
4. Reinsert the water tank and press firmly until it clicks into place.
2. Turn On the Device
Press and hold the Power Button to turn on the device.
• The default temperature on first use is 280°F (140°C).
• When powered on again, the device's Smart Memory Function automatically recalls the last temperature used.
3. Activate the Steam Function
Press the Steam Button once to activate steam mode.
• The white steam indicator light will illuminate.
• Steam is released evenly from the center gap between the heating plates when the plates are closed.
• During first use, steam will begin approximately 5 seconds after activation.
• Releasing the clamp plates will temporarily pause steam output.
• To deactivate steam mode, press the Steam Button again. No steam will be generated when the function is turned off.
Temperature Settings
Select the appropriate temperature based on your hair type by lightly pressing the Temperature Setting Button.
| Temperature | Recommended Hair Type |
|---|---|
| 280°F (140°C ±10°C) | Bleached, damaged, very fine, or thin hair |
| 320°F (160°C ±10°C) | Fine hair or slightly wavy hair |
| 360°F (180°C ±10°C) | Normal to thick hair; wavy to slightly curly hair |
| 390°F (200°C ±10°C) | Thick, coarse hair; tighter curls |
| 430°F (220°C ±10°C) | Professional use only; healthy, extremely coarse hair |
The temperature settings cycle from low to high.
Heating Indicators
Heating Up
During heating, the indicator light for the selected temperature will flash.
Ready to Use
Once the selected temperature is reached, the indicator light will remain steadily illuminated in white.
Straight Hair Styling Instructions
Step 1
Section hair evenly.
Step 2
Place a section of hair between the clamp plates, starting near the roots.
Step 3
Glide the styler smoothly from root to tip in one continuous motion.
Step 4
Repeat as needed until the desired level of straightness is achieved.
Power Off
1. Press and hold the Power Button to turn off the device.
2. All indicator lights will turn off.
3. Allow the device to cool completely before storing.
Helpful Tip
Hearing a sizzling sound? Don't worry.
The sound is created when our micro-cool mist instantly transforms into hydrating steam upon contact with the heated plates. This is normal and indicates that the hydration technology is working properly to help maintain moisture while styling.
